- Available for use in several pools across the country and for longer-term lease
- Steel construction for strength and durability
- Options available for lights, tires, and GPS
23.5 Ft Slider Chassis
Key Benefits
Download Brochures
Please note: The below specifications and features are typical of DCLI’s fleet and not for any specific chassis. If you need exact specifications for a particular piece of equipment, please contact chassisspecs@dcli.com. *Table is best viewed in landscape on mobile
Chassis Specifications and Features
| Function |
|---|
| Carries one (1) 20' ISO container. Meets all TOFC, AAR, DOT, FMVSS, ISO, ANSI, SAE, and TTMA specifications |
| General | |
|---|---|
| Overall Length | 23' 6"/27' 6" (excluding rear bumper) |
| Overall Width | 96" |
| Fifth Wheel Height | 48"±1" |
| Rear Deck Height | 52"±1" |
| Kingpin Location | 18" (from front end of chassis) |
| Axle Spread | 49" |
| Tandem Location | 54" (from rear face of rear bolster) |
| Tare Weight | 6,700 Lbs (±2%) |
| Steel Structure & Components | |
|---|---|
| Material | High-strength GR50 steel |
| Crossmember | Fabricated channel |
| Slider | Tubular with positive safety solid bar stop. Two spring loaded pins lock the slider frame to main frame in retracted or extended location |
| Upper Coupler | 1/4" thick w/ 2" diameter drain holes, reinforced by channel-type kingpin support. 2" AAR certificated kingpin |
| Suspension | Mechanism suspension with three leaf spring |
| Axles | 5" round axles with 22,500 lb capacity, 71-1/2" track, 16-1/2” x 7" Q Brake |
| Electrical | 12 volt lighting system with modular wiring harness |
| Miscellaneous | Standard marking, Conspicuity tape, Document holder, 24" X 24" rubber mud flap |